Nuestra gama de equipos fijos de detección de gas incorpora una amplia variedad de opciones adecuadas para todo tipo de aplicaciones e industrias.
Duis mollis placerat quam, eget laoreet tellus tempor eu. Quisque dapibus in purus in dignissim.
Amplificadores de Llamas | R7847A1074/U
Modelo:Honeywell - R7847A1074/U
R7847A1074/U
Rectification ampli-check flame amplifier with 0.8 second or 1.0 second FFRT
Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.
Flame failure response time of 0.8 or 3.0 seconds.
Flame signal strength ranges from 0.0 to 5.0 Vdc.
Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
Flame signal test jacks to measure amplifier flame signal voltage.
Color-coded labels identify flame detection type. Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
Compatible with existing Honeywell flame detectors (order separately).
Comments : Color: Green
Approvals, Underwriters Laboratories Inc. : Listed: File No. MP268, Guide No. MCCZ
Approvals, Canadian Standards Association : Certified: File No. LR95329-3
Flame Failure Response Time (sec) : 0.8 sec or 1.0 sec
Approvals, Swiss RE : Acceptable
Approvals, Factory Mutual : Approved: Report No. 1V9A0.AF
Self Checking : None (standard)
Use With Primary Safety Control : 7800 SERIES Relay Modules
Use With Flame Sensor : Gas: Rectifying Flame Rods C7004,5,7,8, or 9, Q179 for impedance matching for leadwire runs > 50′ or Ultraviolet Flame Sensor C7012A, C
Amplificadores de Llamas | R7847A1082/U
Modelo:Honeywell - R7847A1082/U
Honeywell - R7847A1082/U
Flame Amplifier, Rectific., FFRT: 2,3sec
Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.
Flame failure response time of 0.8 or 3.0 seconds.
Flame signal strength ranges from 0.0 to 5.0 Vdc.
Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
Flame signal test jacks to measure amplifier flame signal voltage.
Color-coded labels identify flame detection type.
Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
Compatible with existing Honeywell flame detectors (order separately).
Comments : Color: Green
Approvals, Underwriters Laboratories Inc. : Listed: File No. MP268, Guide No. MCCZ
Approvals, Canadian Standards Association : Certified: File No. LR95329-3
Flame Failure Response Time (sec) : 2.0 sec or 3.0 sec
Approvals, Swiss RE : Acceptable
Approvals, Factory Mutual : Approved: Report No. 1V9A0.AF
Self Checking : None (standard)
Use With Primary Safety Control : 7800 SERIES Relay Modules
Use With Flame Sensor : Gas: Rectifying Flame Rods C7004,5,7,8, or 9, Q179 for impedance matching for leadwire runs > 50' or Ultraviolet Flame Sensor C7012A, C
Amplificadores de Llamas | R7847B1023/U
Modelo:Honeywell - R7847B1023/U
Descripción: Flame Amplifier
Comments: Color: Green
Approvals, Underwriters Laboratories Inc.: Listed: File No. MP268, Guide No. MCCZ
Approvals, Canadian Standards Association: Certified: File No. LR95329-3
Flame Failure Response Time (sec): 0.8 sec or 1.0 sec
Approvals, Factory Mutual: Approved: Report No. 1V9A0.AF
Self Checking: Ampli-Check
Use With Primary Safety Control: 7800 SERIES Relay Modules
Use With Flame Sensor: Gas: Rectifying Flame Rods C7004, C7005, C7007, C7008, C7009, Q179
Amplificadores de Llamas | R7847B1031/U
Modelo:Honeywell - R7847B1031/U
Honeywell - R7847B1031/U
Flame Amplifier, Rectific., FFRT: 2,3sec
Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.
Flame failure response time of 0.8 or 3.0 seconds.
Flame signal strength ranges from 0.0 to 5.0 Vdc.
Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
Flame signal test jacks to measure amplifier flame signal voltage.
Color-coded labels identify flame detection type. Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
Compatible with existing Honeywell flame detectors (order separately).
Comments : Color: Green
Approvals, Underwriters Laboratories Inc. : Listed: File No. MP268, Guide No. MCCZ
Approvals, Canadian Standards Association : Certified: File No. LR95329-3
Flame Failure Response Time (sec) : 2.0 sec or 3.0 sec
Approvals, Swiss RE : Acceptable
Approvals, Factory Mutual : Approved: Report No. 1V9A0.AF
Self Checking : Ampli-Check
Use With Primary Safety Control : 7800 SERIES Relay Modules
Use With Flame Sensor : Gas: Rectifying Flame Rods C7004, C7005, C7007, C7008, C7009, Q179; Gas, oil, coal: Ultraviolet Flame Sensor C7012A, C
Amplificadores de Llamas | R7847B1072/U
Modelo:Honeywell - R7847B1072/U
Honeywell - R7847B1072/U
2 OR 3 SEC FLAME FAILURE RESPONSE TIME. FOR USE W/C7012A,C.
Rectification ampli-check flame amplifier for 7800 series relay modules
Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.
Flame failure response time of 0.8 or 3.0 seconds.
Flame signal strength ranges from 0.0 to 5.0 Vdc.
Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
Flame signal test jacks to measure amplifier flame signal voltage.
Color-coded labels identify flame detection type. Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection
system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
Compatible with existing Honeywell flame detectors (order separately).
Comments: Color: Green
Approvals, Underwriters Laboratories Inc.: Listed: File No. MP268, Guide No. MCCZ
Approvals, CSA: Certified: File No. LR95329-3
Flame Failure Response Time (sec): 2.0 sec or 3.0 sec
Approvals, Swiss RE: Acceptable
Approvals, Factory Mutual: Approved: Report No. 1V9A0.AF
Type: Rectification
Self Checking: Ampli-Check
Use With Primary Safety Control: 7800 SERIES Relay Modules
Use With Flame Sensor: Gas: Rectifying Flame Rods C7004,5,7,8, or 9, Q179 for impedance matching for leadwire runs > 50' or Ultraviolet Flame Sensor C7012A, C.
Amplificadores de Llamas | R7847C1005/U
Modelo:Honeywell - R7847C1005/U
Flame Failure Response Time (sec): 2.0 sec or 3.0 sec
Approvals, Underwriters Laboratories Inc.: Listed: File No. MP268, Guide No. MCCZ
Comments: Color: Green
Self Checking: Dynamic Self-Check.
Approvals, Canadian Standards Association: Certified: File No. LR95329-3
Approvals, Factory Mutual: Approved: Report No. 1V9A0.AF
Use With Primary Safety Control: 7800 SERIES Relay Modules
Use With Flame Sensor: Gas, oil, coal: Ultraviolet Flame Sensor C7012E, F
Amplificadores de Llamas | R7848A1008/U
Modelo:Honeywell - R7848A1008/U
Honeywell - R7848A1008/U
Flame Amplifier, Infrared, FFRT: 2,3sec
Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.
Flame failure response time of 0.8 or 3.0 seconds.
Flame signal strength ranges from 0.0 to 5.0 Vdc.
Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
Flame signal test jacks to measure amplifier flame signal voltage.
Color-coded labels identify flame detection type.
Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
Compatible with existing Honeywell flame detectors (order separately).
Comments : Color: Red
Approvals, Underwriters Laboratories Inc. : Listed: File No. MP268, Guide No. MCCZ
Approvals, Canadian Standards Association : Certified: File No. LR95329-3
Flame Failure Response Time (sec) : 2.0 sec or 3.0 sec
Approvals, Swiss RE : Acceptable
Approvals, Factory Mutual : Approved: Report No. 1V9A0.AF
Self Checking : None (standard)
Use With Primary Safety Control : 7800 SERIES Relay Modules
Use With Flame Sensor : Gas, oil, coal: Infrared ( lead sulfide) C7015
Amplificadores de Llamas | R7848B1006/U
Modelo:Honeywell - R7848B1006/U
Honeywell - R7848B1006/U
Infrared ampli-check flame amplifier with 2 or 3 second FFRT
Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.
Flame failure response time of 0.8 or 3.0 seconds.
Flame signal strength ranges from 0.0 to 5.0 Vdc.
Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
Flame signal test jacks to measure amplifier flame signal voltage.
Color-coded labels identify flame detection type. Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system 7800
SERIES relay module locks out on safety shutdown with flame detection system failure.
Compatible with existing Honeywell flame detectors (order separately).
Comments : Color: Red
Approvals, Underwriters Laboratories Inc. : Listed: File No. MP268, Guide No. MCCZ
Approvals, Canadian Standards Association : Certified: File No. LR95329-3
Flame Failure Response Time (sec) : 2.0 sec or 3.0 sec
Approvals, Swiss RE : Acceptable
Approvals, Factory Mutual : Approved: Report No. 1V9A0.AF
Self Checking : Ampli-Check
Use With Primary Safety Control : 7800 SERIES Relay Modules
Use With Flame Sensor : Gas, oil, coal: Infrared ( lead sulfide) C7015
Amplificadores de Llamas | R7848B1014/U
Modelo:Honeywell - R7848B1014/U
Caracteristicas del Amplificador R7848B1014
Tiempo de respuesta de fallo de llama de 0,8 o 3,0 segundos.
La intensidad de la señal de llama varía de 0.0 a 5.0 Vcc.
Conéctelo al módulo de relé 7800 a través del conector de borde de la placa de circuito impreso con llave para una orientación adecuada.
Tomas de prueba de señal de llama para medir el voltaje de señal de llama del amplificador.
Las etiquetas codificadas por colores identifican el tipo de detección de llama. Dynamic Self-Check Amplifier prueba los detectores y todos los componentes electrónicos en el sistema de detección de llama. El módulo de relé SERIE 7800 se bloquea en el apagado de seguridad debido a una falla en el sistema de detección de llama.
Compatible con los detectores de llama Honeywell existentes (pedir por separado).
Especificaciones del Amplificador R7848B1014
Comentarios Color rojo
Aprobaciones, Underwriters Laboratories Inc. Listado: Archivo No. MP268, Guía No. MCCZ
Aprobaciones, Canadian Standards Association Certificado: Archivo No. LR95329-3
Cliente Especial Cleaver Brooks
Rango de temperatura de funcionamiento (F) -40 F a +140 F
Rango de temperatura de funcionamiento (C) -40 C a +60 C
Tiempo de respuesta de fallo de llama (s) 2.0 segundos o 3.0 segundos
Homologaciones, dispositivos de control de seguridad.
Aprobaciones, Swiss RE Aceptable
Aprobaciones, Factory Mutual Aprobado: Informe No. 1V9A0.AF
Auto chequeo Ampli-Check
Usar con control de seguridad primario SERIE 7800 Módulos de relé
Usar con sensor de llama Gas, petróleo, carbón: infrarrojo (sulfuro de plomo) C7015
Amplificadores de Llamas | R7849A1015/U
Modelo:Honeywell - R7849A1015/U
El amplificador de llama R7849A se utiliza con los módulos de control de la serie 7800 y responde a señales detectadas por un grupo de detectores de llama específicos.
Especificaciones:
- Refª completa: R7849A1015 R7849A1023
- Color: púrpura
- Detectores de llama compatibles: detectores UV Minipeeper C7027A, C7035A, C7044
- Rangos de potencia de la señal de llama: 0,0 a 5,0 Vcc.
- Módulo conectable en controladores de la serie 7800
Referencia
Tiempo respuesta fallo llama
R7849A1015 (0.8 – 1 seg)
R7849A1023 (2 – 3 seg)
Amplificadores de Llamas | R7849A1023/U
Modelo:Honeywell - R7849A1023/U
El amplificador de llama R7849A se utiliza con los módulos de control de la serie 7800 y responde a señales detectadas por un grupo de detectores de llama específicos.
Especificaciones:
- Refª completa: R7849A1015 R7849A1023
- Color: púrpura
- Detectores de llama compatibles: detectores UV Minipeeper C7027A, C7035A, C7044
- Rangos de potencia de la señal de llama: 0,0 a 5,0 Vcc.
- Módulo conectable en controladores de la serie 7800
Referencia Tiempo respuesta fallo llama
R7849A1015 (0.8 – 1 seg)
R7849A1023 (2 – 3 seg)
Amplificadores de Llamas | R7849A1080/U
Modelo:Honeywell - R7849A1080/U
Honeywell - R7849A1023
Product type : Flame Amplifier, Ultraviolet
Type: Ultraviolet
Flame Failure Response Time (sec): 3 sec
Self Checking: None (standard)
Use With Primary Safety Control: 7800 SERIES Relay Modules
Use With Flame Sensor: Gas, Oil: Minipeeper C7027A, C7035A, C7044
Color: Purple.
Amplificadores de Llamas | R7849B1013/U
Modelo:Honeywell - R7849B1013/U
Honeywell - R7849B1013/U
Flame Amplifier, UV, FFRT: 0.8,1.0sec
Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.
Flame failure response time of 0.8 or 3.0 seconds.
Flame signal strength ranges from 0.0 to 5.0 Vdc.
Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
Flame signal test jacks to measure amplifier flame signal voltage.
Color-coded labels identify flame detection type. Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
Compatible with existing Honeywell flame detectors (order separately).
Comments : Color: Purple
Approvals, Underwriters Laboratories Inc. : Listed: File No. MP268, Guide No. MCCZ
Approvals, Canadian Standards Association : Certified: File No. LR95329-3
Flame Failure Response Time (sec) : 0.8 sec or 1.0 sec
Approvals, Swiss RE : Acceptable
Approvals, Factory Mutual : Approved: Report No. 1V9A0.AF
Self Checking : Ampli-Check
Use With Primary Safety Control : 7800 SERIES Relay Modules
Use With Flame Sensor : Gas, Oil: Minipeeper C7027A, C7035A, C7044
Amplificadores de Llamas | R7849B1021/U
Modelo:Honeywell - R7849B1021/U
Honeywell - R7849B1021/U
2 OR 3 SEC FLAME FAILURE RESPONSE TIME.
Flame Amplifier, UV, FFRT: 2,3sec
Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.
Flame failure response time of 0.8 or 3.0 seconds.
Flame signal strength ranges from 0.0 to 5.0 Vdc.
Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
Flame signal test jacks to measure amplifier flame signal voltage.
Color-coded labels identify flame detection type. Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection
system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
Compatible with existing Honeywell flame detectors (order separately).
Color: Purple Approvals, Underwriters Laboratories Inc.
Listed: File No. MP268, Guide No. MCCZ Approvals, CSA
Certified: File No. LR95329-3 Flame Failure Response Time (sec)
2.0 sec or 3.0 sec Approvals, Swiss RE
Acceptable Approvals, Factory Mutual
Approved: Report No. 1V9A0.AF Type
Ultraviolet Self Checking
Ampli-Check Use With Primary Safety Control
7800 SERIES Relay Modules Use With Flame Sensor
Gas, Oil: Minipeeper C7027A, C7035A, C7044.
Amplificadores de Llamas | R7851B1000/U
Modelo:Honeywell - R7851B1000/U
Honeywell - R7851B1000/U
Flame Amplifier, Ampli-check
Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.
Flame failure response time of 0.8 or 3.0 seconds.
Flame signal strength ranges from 0.0 to 5.0 Vdc.
Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
Flame signal test jacks to measure amplifier flame signal voltage.
Color-coded labels identify flame detection type.
Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
Compatible with existing Honeywell flame detectors (order separately).
Comments : Color: White
Approvals, Underwriters Laboratories Inc. : Listed: File No. MP268, Guide No. MCCZ
Approvals, Canadian Standards Association : Certified: File No. LR95329-3
Operating Humidity Range (% RH) : 85% RH continuous, non-condensing
Flame Failure Response Time (sec) : 2.0 sec or 3.0 sec
Approvals, Swiss RE : Acceptable
Approvals, Factory Mutual : Approved: Report No. 1V9A0.AF
Self Checking : Ampli-Check
Use With Primary Safety Control : 7800 SERIES Relay Modules
Use With Flame Sensor : Gas, Oil, Coal: Optical (UV, Visible Light) C7927, C7962
.
Amplificadores de Llamas | R7851B1018/U
Modelo:Honeywell - R7851B1018/U
Flame failure response time of 0.8 or 3.0 seconds.
Flame signal strength ranges from 0.0 to 5.0 Vdc.
Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
Flame signal test jacks to measure amplifier flame signal voltage.
Color-coded labels identify flame detection type. Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
Compatible with existing Honeywell flame detectors (order separately).
Type: Ultraviolet
Flame Failure Response Time (sec): 0.8 sec or 1.0 sec
Self Checking: Ampli-Check
Use With Primary Safety Control: 7800 SERIES Relay Modules
Use With Flame Sensor: Gas, Oil: Minipeeper C7027A, C7035A, C7044
Amplificadores de Llamas | R7852A1001/U
Modelo:Honeywell - R7852A1001/U
Honeywell - R7852A1001/U
Flame Amplifier, Infrared, FFRT: 2,3sec
SOLID STATE PLUG-IN NON-SELF CHECKING INFRARED AMPLIFIER WHICH AMPLIFIES A SMALL ELECTRICAL SIGNAL GENERATED BY A FLAME TO PRODUCE THE FLAME-ON/FLAME-OFF SIGNAL. DESIGNED TO WORK WITH THE C7915A IR FLAME DETECTOR.
Comments : Color: Red/White
Approvals, Underwriters Laboratories Inc. : Listed: File No. MP268, Guide No. MCCZ
Approvals, Canadian Standards Association : Certified: File No. LR95329-3
Flame Failure Response Time (sec) : 2.0 sec or 3.0 sec
Approvals, Swiss RE : AcceptableApprovals, Factory MutualApproved: Report No. 1V9A0.AF
Self Checking : None (standard)
Use With Primary Safety Control : 7800 SERIES Relay Modules
Use With Flame Sensor : Gas, oil, coal: Infrared (lead sulfide) C7915
Amplificadores de Llamas | R7852B1009/U
Modelo:Honeywell - R7852B1009/U
DYNAMIC AMPLI-CHECK INFRARED FLAME AMPLIFER FOR USE WITH C7915 SOLID STATE FLAME DETECTOR AND 7800 SERIES BURNER CONTROLS
Infrared ampli-check flame amplifier with 2 or 3 second FFRT
SOLID STATE PLUG-IN NON-SELF CHECKING INFRARED AMPLIFIER WHICH AMPLIFIES A SMALL ELECTRICAL SIGNAL GENERATED BY A FLAME TO PRODUCE THE FLAME-ON/FLAME-OFF SIGNAL.
DESIGNED TO WORK WITH THE C7915A IR FLAME DETECTOR.
Comments : Color: Red/White
Approvals, Underwriters Laboratories Inc. : Listed: File No. MP268, Guide No. MCCZ
Approvals, CSA : Certified: File No. LR95329-3
Flame Failure Response Time (sec) : 2.0 sec or 3.0 sec
Approvals, Swiss RE : Acceptable
Approvals, Factory Mutual : Approved: Report No. 1V9A0.AF
Type : Infrared
Self Checking : Ampli-Check
Use With Primary Safety Control : 7800 SERIES Relay Modules
Use With Flame Sensor : Gas, oil, coal: Infrared (lead sulfide) C7915
Amplificadores de Llamas | R7861A1026/U
Modelo:Honeywell - R7861A1026/U
Honeywell - R7861A1026/U
Flame Amplifier, Dynamic Self Check
Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.
Flame failure response time of 0.8 or 3.0 seconds.
Flame signal strength ranges from 0.0 to 5.0 Vdc.
Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
Flame signal test jacks to measure amplifier flame signal voltage.
Color-coded labels identify flame detection type.
Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
Compatible with existing Honeywell flame detectors (order separately).
Comments : Color: Purple
Approvals, Underwriters Laboratories Inc.: Listed: File No. MP268, Guide No. MCCZ
Approvals, Canadian Standards Association : Certified: File No. LR95329-3
Flame Failure Response Time (sec): 2.0 sec or 3.0 sec
Approvals, Swiss RE : Acceptable
Approvals, Factory Mutual : Approved: Report No. 1V9A0.AF
Self Checking : Dynamic Self-Check
Use With Primary Safety Control : 7800 SERIES Relay Modules
Use With Flame SensorGas, oil, coal: Ultraviolet Flame Sensor C7061
Amplificadores de Llamas | R7861A1034/U
Modelo:Honeywell - R7861A1034/U
Honeywell - R7861A1034/U
Flame Amplifier, Dynamic Self Check
Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.
Flame failure response time of 0.8 or 3.0 seconds.
Flame signal strength ranges from 0.0 to 5.0 Vdc.
Plug into 7800 relay module through printed circuit board edge connector keyed for proper orientation.
Flame signal test jacks to measure amplifier flame signal voltage.
Color-coded labels identify flame detection type. Dynamic Self-Check Amplifier test the detectors and all electronic components in the flame detection system 7800 SERIES relay module locks out on safety shutdown with flame detection system failure.
Compatible with existing Honeywell flame detectors (order separately).
Color: Purple
Approvals, Underwriters Laboratories Inc. : Listed: File No. MP268, Guide No. MCCZ
Approvals, Canadian Standards Association : Certified: File No. LR95329-3
Flame Failure Response Time (sec) : 0.8 sec or 1.0 sec
Approvals, Swiss RE : Acceptable
Approvals, Factory Mutual : Approved: Report No. 1V9A0.AF
Self Checking : Dynamic Self-Check
Use With Primary Safety Control : 7800 SERIES Relay Modules
Use With Flame Sensor : Gas, oil, coal: Ultraviolet Flame Sensor C7061
Amplificadores de Llamas | R7886A1001/U
Modelo:Honeywell - R7886A1001/U